5 Horseshoe Dynamometer Transducer

This 5" Horseshoe Dynamometer system is designed to facilitate installation of the horseshoe load cell, and to eliminate measurement errors caused by changes in pump spacing resulting from installation of a horseshoe transducer between the carrier bar and the permanent polished rod clamp.
Echometer

Overview

The hydraulic lift horseshoe dynamometer requires permanent installation of an inexpensive spacer spool over the polished rod positioned between the permanent polished rod clamp and the pumping unit carrier bar. When a dynamometer test is desired, the horseshoe transducer and a hydraulic lift assembly are easily inserted into the spool. The hydraulic lift is actuated using a small portable hydraulic pump, which transfers the polished rod load from the spacer to the 5" horseshoe load cell. Insertion of a ¼ inch spacer plate between the hydraulic lift and the horseshoe transducer and the release of hydraulic pressure allow removal of the hydraulic pump. Then, operation of the pumping unit until the well stabilizes allows a dynamometer analysis representative of conditions as the well is normally produced.
Echometer 5 in Horseshoe Dynamometer Transducer

Key Features


  • Accurately measures both polished rod load and position
  • Easily installed into a permanently installed spacer assembly that fits over the polished rod between the carrier bar and polished rod clamp
  • Facilitates installation of the horseshoe load cell
  • Calibrated to yield overall accuracy of 0.5% of range or better
Echometer 5 in Horseshoe Dynamometer Transducer

Specifications


  • Rated at 50,000 lbs
  • Calibrated to yield overall accuracy of 0.5% of range or better
  • Instrumentation grade stainless steel
  • Includes high accuracy accelerometer
  • 2" throat

Related Products

Well Monitoring Equipment used frequently with the Horseshoe Dynamometer Transducer

Polished Rod Transducer

Polished Rod Transducer

Measures polished rod load and position with sufficient accuracy for most dynamometer analysis.
Pressure Transducer

Pressure Transducer

Measures pressure and temperature for accurate pressure and pressure build-up rate measurements over a wide range of temperatures.
Power-Current Transducer

Power-Current Transducer

Measures motor power and motor current for software determination of overall electrical efficiency, motor loading, electricity usage, and pumping unit gearbox loading and balance.
Current Transducer

Current Transducer

Measures motor current for determination of motor loading and motor balance.
Echometer

Contact UPC Global

upc global logo

Contact us

U.S.

1 (281) 644 0302

410 West Grand Parkway South

Suite 375. Katy, TX. 77494

© 2016 Unlimited Petroleum Consulting l UPC Global All Rights Reserved.

Search