RWB API Pump
LUFKIN Don-Nan
RWB API insert pumps are thin-walled, stationary barrel, bottom hold-down pumps recognized by API as a standard design.
Don-Nan RWB API insert pumps are thin-walled, stationary barrel, bottom hold-down pumps recognized by API as a standard design.
These pumps are most often used in shallow to moderate depths where there is little chance of sand accumulation. If sand is an issue, a top hold-down design may be more suitable. Alternatively, nonstandard accessories such as a top seal may be used to eliminate a stuck-pump scenario. The thin-walled barrel is threaded on the inside, which reduces the number of connections needed on the pump and enables a larger bore.
Seating options on this pump include mechanical or cup types suitable for high temperatures and mechanical types for simplified well maintenance. A mechanical hold-down does not require repair unless major damage has occurred, and cups should be replaced each time the pump is unset. Both hold-down types follow the same procedure of setting and unsetting by placing the weight of the sucker rods down on the pump or by lifting up.
Seating options on this pump include mechanical or cup types suitable for high temperatures and mechanical types for simplified well maintenance. A mechanical hold-down does not require repair unless major damage has occurred, and cups should be replaced each time the pump is unset. Both hold-down types follow the same procedure of setting and unsetting by placing the weight of the sucker rods down on the pump or by lifting up.
